The RMC-3101 provides up to nine available slots for any fiber optic isolator or telephone disconnect unit. The tenth available slot must be occupied by a PSM-3010 power supply module. Each RMC-3101 will be shipped with one PSM-3010. A second PSM-3010 may also be added for power redundancy, leaving eight available slots for any fiber optic isolator. If the first PSM-3010 fails, the second PSM-3010 will take over the entire load and carry on normally. A cable bay is provided below the module bay for cable routing and enhanced air fl ow through two rear exhaust fans and a vented front panel.
An RMC-3102 is identical to the RMC-3101 with the addition of an optical patch bay mounted on the rear.
Each fiber optic isolator must also be accompanied by a CMA-3002 chassis mount adapter, which slides the fi ber optic isolator into the slot and assures correct alignment of the isolator power connector to the power bus inside the RMC-3101.
FiberPlex recommends the RMC-3101R for TEMPEST or other high security applications.
- 3U Chassis holds up to 9 FOI isolators
- Power redundancy is available with a second power module (only 8 FOIs fit with redundant power)
- Each FOI isolator is easily accessable through a removable front panel
- Enhanced cooling via tow rear mounted exhaust fans
| FAN SPECIFICATIONS | |||||
|
Speed
|
Max Air Pressure
|
Air Flow
|
Noise
|
||
| 2500 RPM |
3.5 mmH2O
|
0.14 InchH2O
|
50.5 CFM
|
1.43 m3/min |
34dBA @ 1M
|
|
PHYSICAL DIMENSIONS
|
|||||
|
Height
|
Width
|
Depth
|
Weight
|
||
|
5.25 in (133mm)
|
19 in (483 mm)
|
12.75 (234 mm)
|
22 lb (10 kg)
|
||
| SPECIFICATIONS - PSM-3010 | |||||
|
Min
|
Typ
|
Max
|
Unit
|
||
| Power Supply | Input Voltage |
85
|
-
|
250
|
VAC
|
| Input Frequency |
40
|
-
|
400
|
Hz
|
|
| Input Power |
-
|
75
|
-
|
W
|
|
| Output Voltage |
-
|
9
|
-
|
VDC
|
|
| Supply Current |
-
|
8.3
|
-
|
A
|
|
| Ouput Power |
-
|
75
|
-
|
W
|
|
| Environmental | Storage Temperature | -40 | - | 85 | °C |
| Operating Temperature | 0 | - | 50 | °C | |
|
Length
|
Width
|
Height
|
Weight | ||
| Case Dimensions | PSM-3010 |
9.559 in (243 mm)
|
1.57 in (40 mm)
|
3.468 in (88 mm)
|
1.6 lb (0.7 kg)
|
 |
Datasheet |
|
User Manual |
| PSQ-4909 | Power Supply for size 4 FOI type isolator stand-alone configuration |
| WMA-3002 | Wall mount adapter for FOI type isolators |
| RMC-3101 | 19" Rack mount chassis, 5 1/4" (3U) for FOI type isolators |
| CMA-3002 | Chassis Mounting Adapter for FOI type isolator |
| PSM-3010 | Power Supply Module for RMC-3101 and RMC-3102 |
