The DGL-422 control cable is designed for applications where you are feeding RS-422 control data out of the 9 pin control data output of a Yamaha digital console into the “Control” circuits RJ45 jack of the VIM-1832 (i.e. sending control data from mix position back down to the stage). This dongle has active electronics inside the 9 pin connector. Two of these cables are required for remote control of on stage mic preamps. This control data travels with the audio data on the same fiber pair.
- Allows control of Yamaha AD8HR mic pres from a Yamaha Console
- Converts RS-422 Data
- Data transported on existing fiber along with input (return) audio payload
- Powered by connection to Series 32 device
| GENERAL SPECIFICATIONS | ||||
|
Min
|
Typ
|
Max
|
||
| Power Requirement from Control Host | Voltage Range (VDC) |
-
|
5
|
-
|
| Supply Current (mA) |
-
|
-
|
60
|
|
| RX Data Rate (KHz) |
DC
|
38.4
|
200
|
|
| TX Data Rate (KHz) |
DC
|
38.4
|
1000
|
|
| User Connections | D9 (RS422) | |||
| Host Connections | RJ-45 (x3) | |||
| Environmental | Storage Temperature (°C) |
-40
|
-
|
85
|
| OperatingTemperature (°C) |
0
|
-
|
50
|
|
| DGL422 | RS422 Dongle for use with Yamaha AD8HR |
This product has no accessories
