Overview

The FiberPlex Technologies RMC-3700 is a heavy duty enclosure designed to survive in indoor and outdoor environments. The chassis is rated to IP-54, protecting the internal components from dust and windblown rain. Each chassis provides up to nine (9) available slots for any FiberPlex fiber optic isolator (FOI) or telephone disconnect unit.

The tenth available slot must be occupied by a power supply module. Each chassis will be shipped with one power supply module (PSM). A second power supply module may also be added for system power redundancy, leaving eight (8) available slots for the installation various combinations of FOI units. If the first power supply module fails, the second will assume the entire system load and carry on normally. The failed power supply module may be hot swapped with a new one without interruption of FOI operation.

Each FOI must be mated to a 3000-series chassis mount adapter (CMA), which interfaces the FOI with the slot and assures correct alignment of the isolator power connector and the chassis power bus.

Typical Applications

The RMC-3700 can be punched to accommodate conduit per the clients’ needs. The heavy mounting ears allow solid mounting on any vertical surface. An integrated door hasp allows for locking the chassis. This makes the RMC-3700 perfect for outdoor SCADA applications, perimeter security for campus’ and military bases, rooftop mounting for antenna or SATCOM applications or even along rail or roadways for transportation data and control.

Features:

Holds up to 9 FOI modules
IP-54 Rated
One PSM-3010 power supply included
Power redundancy is available through an optional second power supply module.
Active cooling for FOI modules
Specialty louvered vents and sealed door resist ingress of heavy and windblown rain.
Conduit holes may be punched into chassis in of customer’s choice.

Applications:

Campus
Bases
Physical Security
Rooftop Applications
SCADA
Transportation

FAN SPECIFICATIONS
			Min		Typ	Max		Unit
Fan Speed			-		2500	-		RPM
Air Pressure			-		-	3.5		mmH₂O
			-		-	0.14		inH₂O
Air Flow			-		50.5	-		CFM
			-		1.43	-		m³/min
Noise			-		34	-		dBA @ 1m
PHYSICAL SPECIFICATIONS
Case Dimensions	Depth	Width		Height			Weight
RMC-3700	7.38 in (187.5 mm)	26.25 in (667 mm)		16.0 in (406 mm)			64 lb (29 kg)

PSM-3010 Specifications

ELECTRICAL SPECIFICATIONS
				Min		Typ	Max		Unit
Input	Voltage			100		-	240		VAC
	Frequency			50		-	60		Hz
	Power			-		-	125		W
Output	Voltage			-		9	-		VDC
	Supply Current			-		-	8.3		A
	Power			-		-	76.5		W
ENVIRONMENTAL SPECIFICATIONS
				Min		Typ	Max		Unit
Storage Temperature				-40		-	85		°C
Operating Temperature				0		-	50		°C
PHYSICAL SPECIFICATIONS
Case Dimensions		Length	Width		Height			Weight
PSM-3010		9.56 in (243 mm)	1.57 in (40 mm)		3.49 in (88 mm)			1.6 lb (0.7 kg)

RMC-3700

There are no options for this product

	Datasheet
	User Manual

PSQ-4909	Power Supply for size 4 FOI type isolator stand-alone configuration
WMA-3002	Wall mount adapter for FOI type isolators
RMC-3101	19" Rack mount chassis, 5 1/4" (3U) for FOI type isolators
CMA-3002	Chassis Mounting Adapter for FOI type isolator