A complete bundled package for Fire Alarm annuciation applications. Includes warning strobe.
The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. In addition, fiber optic cable offers much longer transmission distances than copper wiring. Multimode optics on the units can extend the distance to 2km.
FOI-2981:Optical Transmitter
- 2 Audio Inputs
- 1 Doorbell Input
FOI-4982:Optical Receiver
- 2 Audio Outputs (8 Ohm and 600 Ohm)
ADP-2981:
- Amplified Speaker withStrobe
PSQ-2909:
- Power Supply for FOI-2981
WMA-3002:
- Wall Mount Adapter for FOI-2981
FC-VMTT1-0-8:
- Fiber Cable, Multimode, Simplex, ST-ST, 8 meter
| General SPECIFICATIONS – ADP-2981 | |||||
| Power Requirement | 120/240 VAC, 50/60 Hz | ||||
| Input Connector | RCA Type Phono Jack | ||||
| Input Impedance | 50 kΩ. | ||||
| Output Connector | RCA Type Phono Jack | ||||
| Output Impedance | 600 Ω | ||||
| Output Signal Level | 100 mV | ||||
| Case Dimensions | 11-1/2” Wide x 11-1/8” High x 4-1/16” Deep | ||||
| ELECTRICAL SPECIFICATIONS – FOI-2981 | |||||
| Power Requirement | 9 VDC @ 275 mA | ||||
| Frequency Response | 100 Hz – 8 kHz ± 3 dB | ||||
| Input Level for A and B |
Minimum
|
Maximum
|
|||
| 50 mV RMS | Adjust | ||||
| Doorbell Operation for C | A doorbell buzzer is generated when this input is grounded. | ||||
| Priority Scheme | A (highest – overides B and C) C (overides B) B (lowest) | ||||
| Interface Connector A, B and C | RCA Type Phono Jack | ||||
| ELECTRICAL SPECIFICATIONS – FOI-4982 | |||||
| Power Requirements | 9 VDC @ 275 mA | ||||
| AUDIO OUTPUT 8 OHM Interface Connector | 2-Conductor 1/4” Enclosed Telephone Jack (Balanced Output) | ||||
| AUDIO OUTPUT 600 OHM Interface Connector | RCA Type Phono Jack | ||||
| OPTICAL CHARACTERISTICS – FOI | |||||
|
Fiber
|
Size
|
Max Distance
|
Wavelength
|
Output Power
|
|
|
Multimode
|
62.5/125
|
2 km
|
820 nm
|
-18 dBm
|
|
| SPECIFICATIONS – PSQ-2909 | |||||
|
Min
|
Typ
|
Max
|
Unit
|
||
| Power Supply | Input Voltage |
80
|
-
|
250
|
VAC
|
| Input Frequency |
40
|
-
|
400
|
Hz
|
|
| Output Voltage |
-
|
9
|
-
|
VDC
|
|
| Supply Current |
-
|
1
|
-
|
A
|
|
| Ouput Power |
-
|
9
|
-
|
W
|
|
| Environmental | Storage Temperature | -40 | - | 85 | °C |
| Operating Temperature | 0 | - | 50 | °C | |
|
in (mm)
|
Width
|
Height
|
Length
|
||
| Case Dimensions | PSQ-2910 | 1.312 (33) | 2.562 (65) | 2.25 (57) | |
| PSQ-3910 | 1.453 (40) | 3.188 (81) | 2.375 (60) | ||
| PSQ-4910 | 1.453 (40) | 2.562 (65) | 2.25 (57) | ||
| FAK-2981-ST | Bundled Fire Alarm Kit with strobe and multimode ST optics |
| Standalone Operation | |
| PSQ-2909 | Standalone AC Power Supply |
| PSQ-2920 | Standalone DC Power Supply |
| WMA-3002 | Wall Mount Adapter |
| WMA-2001 | Wall Mount Adapter with ST Optical Patch |
| Chassis Mounting | |
| RMC-2101 | 2U, 19" Rack Mount Chassis. Holds up to 9 FOI Modules |
| CMA-2001 | Chassis Mount Adapter for RMC-2101 Chassis. (1) per FOI Module required |
| PSM-2010 | Spare Power Supply for RMC-2101 |
| RP2 | 16 Channel Modular Bolt-On Connector Panel for RMC-2101 |
| RMC-3101 | 3U, 19" Rack Mount Chassis. Holds up to 9 FOI Modules |
| CMA-3002 | Chassis Mount Adapter for RMC-3101 Chassis. (1) per FOI Module required |
| PSM-3010 | Spare Power Supply for RMC-3101 |
| Industrial Solutions | |
| RMC-3700 | Environmental Enclosure for FOI Modules |
| CMA-3002 | Chassis Mount Adapter for RMC-3101 Chassis. (1) per FOI Module required |
| PSM-3010 | Spare Power Supply for RMC-3101 |
