Serial Converter EIA-530/RS-422, 6 Mbps

Model #: FOI-4451 | FOI-4541

FOI-4451 | FOI-4541

The FOI-4451 and FOI-4541 both provide complete electrical isolation for RS- 422 communications. The units are transparent to all handshaking protocols and can accept data and clock signals up to a maximum rate of 6.144 Mbps. A regeneration switch on the FOI-4451 allows users to toggle between synchronous applications that require Send Timing (ST) and asynchronous or synchronous applications that require Terminal Timing (TT). They support tail circuit and null modem functions for DCE to DCE or DTE to DTE communications. This requires two of the same FOI units. An alternate interface (V.35 or RS-232) may be installed at the opposite end, allowing the user to create a link between two electrically incompatible interfaces without requiring a separate interface converter.

The units can be used in areas of high electrical noise or in and out of RF shielded enclosures. The fiber optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fiber optic cable does not radiate any emissions. FiberPlex recommends “T” units for high security applications because they have been TEMPEST tested and approved. In addition, fiber optic cable offers much longer transmission distances than traditional RS-422 cabling. Multimode optics on the units can extend the distance to 2km, while singlemode optics can further extend the distance to 20km. A typical link consists of an FOI-4451 at the Data Communication Equipment (DCE) and an FOI-4541 at the Data Terminal Equipment (DTE) with a duplex fiber optic cable between them.

Flexible Mounting and Powering Options

The FOI-4451 and FOI-4541 are part of the FOI line of products designed for ruggedized mil applications. They are housed in the familiar FOI shielded can enclosure. For standalone applications they can be powered by adding a PSQ‐4909 AC supply or a PSQ‐4920 DC power supply (not included). Optionally, up to 8 FOI units can be mounted on CMA chassis adapters and installed in an RMC‐3101 or RMC‐2101 rack mount chassis. The units are powered redundantly by a common back plane connection.

  • Serial Data to Fiber
  • Data Rate: DC to 6.144 Mbps

Compatible with:

  • TIA/EIA-530 (RS-530)
  • MIL-STD-188-114A balanced type 1 and type 2
  • FED STD 1030A
ELECTRICAL SPECIFICATIONS
    Min Typ Max Unit
Power Requirement Voltage Range 7 9 32 V
Supply Current - 625 - mA
BalancedDifferential Signals Data Rate DC - 6.144 Mbps
Sampling Jitter 0 - 23 %
Input Load - 100 - Ω
Common-Mode Input Voltage - - ±7 V
Common-Mode Output Voltage (100 Ω Load) - 1.8 3 V
UnbalancedSingle-Ended Signals Data Rate DC - 120 kbps
Sampling Jitter 0 - 0.4 %
Input Load 3 5 7
Input Voltage Range -25 - 25 V
Output Voltage (5 kΩ load) - ±5 - V
Environmental Storage Temperature -40 - 85 °C
Operating Temperature 0 - 50 °C
Interface Connector FOI-4451 DB-25 Male
FOI-4541 DB-25 Female
OPTICAL SPECIFICATIONS
  Min Typ Max Unit
Data Rate - 270 - Mbps
Recommended Jitter - - 40 Psec
  Wavelength Output Power Receiver Sensitivity Max Distance
Multimode 1300 -18 dBm -30 dBm 2 km
Singlemode 1300 -11 dBm -32 dBm 20 km

PHYSICAL SPECIFICATIONS

Case Dimensions Length Width Height Weight
FOI-4541 / FOI-4451 4.5 in (114 mm) 2.56 in (65 mm) 1.45 in (37 mm) 0.4 lb (0.2 kg)
oi_FOI-4541.png
Standalone Operation  
PSQ-4909  Standalone AC Power Supply
PSQ-4920 Standalone DC Power Supply
WMA-3002 Wall Mount Adapter
WMA-2001 Wall Mount Adapter with ST Optical Patch
Chassis Mounting  
RMC-2101 2U, 19" Rack Mount Chassis. Holds up to 9 FOI Modules
CMA-2001 Chassis Mount Adapter for RMC-2101 Chassis. (1) per FOI Module required
PSM-2010 Spare Power Supply for RMC-2101
RP2 16 Channel Modular Bolt-On Connector Panel for RMC-2101
  
RMC-3101 3U, 19" Rack Mount Chassis. Holds up to 9 FOI Modules
CMA-3002 Chassis Mount Adapter for RMC-3101 Chassis. (1) per FOI Module required
PSM-3010 Spare Power Supply for RMC-3101
Industrial Solutions
RMC-3700  Environmental Enclosure for FOI Modules
CMA-3002 Chassis Mount Adapter for RMC-3101 Chassis. (1) per FOI Module required
PSM-3010 Spare Power Supply for RMC-3101

How to Buy

We support a variety of clients from multiple markets. To make the buying process the cleanest and most efficient we provide a number of ways to purchase our products.

See our How To Buy page to find the procurment method that works best for you and your business.