The RMC-2101 provides up to nine available slots for any size 2 or 4 FOI fiber optic isolator. The tenth available slot must be occupied by a PSM-2010 power supply module. Each RMC-2101 will be shipped with one PSM-2010. A second PSM-2010 may also be added for power redundancy, leaving eight available slots for any fiber optic isolator. If the first PSM-2010 fails, the second PSM-2010 will take over the entire load and carry on normally. A cable bay is provided below the module bay for cable routing and enhanced air flow through two front exhaust fans.
Each fiber optic isolator must also be accompanied by a CMA-2001 chassis mount adapter, which slides the fiber optic isolator into the slot and assures correct alignment of the isolator power connector to the power bus inside the RMC-2101.
FiberPlex recommends the RMC-2101R for TEMPEST or other high security applications.
- 2U Chassis holds up to 9 FOI size 2 or 4 isolators
- Power redundancy is available with a second power module (only 8 FOIs fit with redundant power)
- Each FOI isolator is easily accessible through a removable front panel
- Enhanced cooling via tow front mounted exhaust fans
| FAN SPECIFICATIONS | |||||
|
Speed
|
Max Air Pressure
|
Air Flow
|
Noise
|
||
| 2500 RPM |
3.5 mmH2O
|
0.14 InchH2O
|
50.5 CFM
|
1.43 m3/min |
34dBA @ 1M
|
|
PHYSICAL DIMENSIONS
|
|||
|
Height
|
Width
|
Depth
|
Weight
|
|
3.5 in (89mm)
|
19 in (483 mm)
|
11.35 (288 mm)
|
16 lb (7.25 kg)
|
| SPECIFICATIONS - PSM-2010 | |||||
|
Min
|
Typ
|
Max
|
Unit
|
||
| Power Supply | Input Voltage |
85
|
-
|
250
|
VAC
|
| Input Frequency |
40
|
-
|
400
|
Hz
|
|
| Input Power |
-
|
75
|
-
|
W
|
|
| Output Voltage |
-
|
9
|
-
|
VDC
|
|
| Supply Current |
-
|
8.3
|
-
|
A
|
|
| Ouput Power |
-
|
75
|
-
|
W
|
|
| Environmental | Storage Temperature | -40 | - | 85 | °C |
| Operating Temperature | 0 | - | 50 | °C | |
|
Length
|
Width
|
Height
|
Weight | ||
| Case Dimensions | PSM-2010 |
6.375 in (162 mm)
|
1.57 in (40 mm)
|
2.844 in (72 mm)
|
1.6 lb (0.7 kg)
|
