The SFP-BSDVX-0000-L is an electrical SFP transceiver module designed to encode and decode composite signals over 75Ω coaxial cables via HD-BNC™ connectors.

On the receive channel, the module decodes NTSC/PAL composite inputs and convert to SD-SDI signal. On the transmit channel, the module encodes the SD-SDI signal to NTSC/PAL composite.

The SFP-BSDVX-0000-L provides module identification information, configuration
and diagnostic monitoring through a two wire serial interface. It is also a hotpluggable solution for field system upgrade and maintenance.

The SFP-BSDVX-0000-L is interchangeable with other MSA optical video SFP or coaxial SFP improving product flexibility. Ganged cages, belly-to-belly and superposed cages mounting are supported. The module is SMPTE compliant resulting in reduced development effort and cost.

The SFP-BSDVX-0000-L is Pb-free and ROHS compliant.

SMPTE 259M-C compliant
HD-BNC™ connectors (75Ω)
Supported Composite Standards:
- – NTSC M, NTSC J, NTSC 4.43
- – PAL B/G/H/I/D, PAL M, PAL N, PAL 60
Rx Channel:
- 10-bit Composite to SD-SDI video decoder
- 4x Oversampling (54Mhz)
- Test Pattern Generation
Tx Channel:
- SD-SDI to Composite 10-bit video encoder
- Up to 16x Oversampling (216Mhz)
- Multiple Chroma & Luma filters
- Test Pattern Generation
Control via serial interface including:
- Voltage & Temperature Monitoring
- Module Information
- Analog Status and Control registers

Low Power Consumption - typical 1100mW
Single Supply +3.3V
58.5mm x 13.4mm x 8.6mm SFP Package

SFP-BSDVXC-0000-L	SD-SDI Transceiver
SFP-BSDVT2-0000-L	SD-SDI Dual Transmitter (For use with FOI-6012 or TD-6012 only)
SFP-BSDVR2-0000-L	SD-SDI Dual Receiver (For use with FOI-6012 or TD-6012 only)